Hi Duc,
HA can be toggled off via the
impcfg menu.
From the CLI on the gateway, type
impcfg to access a text UI for modifying various configurations on the gateway.
For a full impcfg functionality map, please see:
https://docs.imperva.com/bundle/v13.6-administration-guide/page/8738.htmThe option for which you are seeking is within impcfg under:
Manage SecureSphere Gateway > Manage interfaces and routes (for a bridge IMPVHA) > Toggle High Availability on a Bridge (Enabling HA will enable STP as well)Also, please see:
https://docs.imperva.com/bundle/v13.6-administration-guide/page/58962.htmThanks.
------------------------------
Jaired Anderson
Principal Consultant
Imperva
Tulsa OK
------------------------------
Original Message:
Sent: 10-19-2020 20:20
From: Duc Dinh Minh
Subject: Redundant Architecture (STP) - Bridge IMPVHA
Dear Team,
Following the below documents, If the network have STP, I need to use Bridge IMPVHA with IMPVHA off.
https://docs.imperva.com/bundle/v13.6-administration-guide/page/8568.htm
But How can I setup Bridge IMPVHA with IMPVHA off? I cannot see the options for IMPVHA off.
Thank you
#On-PremisesWAF(formerlySecuresphere)
------------------------------
Duc Dinh Minh
MTech
VIC
------------------------------