Imperva Cyber Community

Hi,

In ABR Mode of v14.3, why does it need to remove HTTP and HTTPS ports from the service?

I'm trying to find a reason for that in the documents but no explanation. What if we need to use a custom ports like 8080 or 8443?
#On-PremisesWAF(formerlySecuresphere)

------------------------------
Oliver Naabay
Engineer
makati
------------------------------

In ABR mode, protection of ports in pure bridge mode is currently not supported. only TRP rules are supported. To avoid confusion, the GW enforces the deletion of these ports from configuration.

------------------------------
Anat Zadik (csp)
Engineering Manager
Tel Aviv CA
------------------------------

Original Message:
Sent: 03-19-2021 05:16
From: Oliver Naabay
Subject: In ABR Mode, why do the ports needs to be removed?

Hi,

In ABR Mode of v14.3, why does it need to remove HTTP and HTTPS ports from the service?

I'm trying to find a reason for that in the documents but no explanation. What if we need to use a custom ports like 8080 or 8443?
#On-PremisesWAF(formerlySecuresphere)

------------------------------
Oliver Naabay
Engineer
makati
------------------------------

@Anat Zadik

Thank you very much for the response.

We enabled the TRP and for now it is working fine. But what if we need to use a custom ports like 8080 or 8443? Example, to access oliver.com I will use oliver.com:8080. Do we need to add these ports?

------------------------------
Oliver Naabay
Engineer
makati
------------------------------

Original Message:
Sent: 03-21-2021 03:58
From: Anat Zadik (csp)
Subject: In ABR Mode, why do the ports needs to be removed?

In ABR mode, protection of ports in pure bridge mode is currently not supported. only TRP rules are supported. To avoid confusion, the GW enforces the deletion of these ports from configuration.

------------------------------
Anat Zadik (csp)
Engineering Manager
Tel Aviv CA

Original Message:
Sent: 03-19-2021 05:16
From: Oliver Naabay
Subject: In ABR Mode, why do the ports needs to be removed?

Hi,

In ABR Mode of v14.3, why does it need to remove HTTP and HTTPS ports from the service?

I'm trying to find a reason for that in the documents but no explanation. What if we need to use a custom ports like 8080 or 8443?
#On-PremisesWAF(formerlySecuresphere)

------------------------------
Oliver Naabay
Engineer
makati
------------------------------

Yes, you will need to add a TRP rule for these ports.

------------------------------
Anat Zadik (csp)
Engineering Manager
Tel Aviv CA
------------------------------

Original Message:
Sent: 03-22-2021 04:12
From: Oliver Naabay
Subject: In ABR Mode, why do the ports needs to be removed?

@Anat Zadik

Thank you very much for the response.

We enabled the TRP and for now it is working fine. But what if we need to use a custom ports like 8080 or 8443? Example, to access oliver.com I will use oliver.com:8080. Do we need to add these ports?

------------------------------
Oliver Naabay
Engineer
makati

Original Message:
Sent: 03-21-2021 03:58
From: Anat Zadik (csp)
Subject: In ABR Mode, why do the ports needs to be removed?

In ABR mode, protection of ports in pure bridge mode is currently not supported. only TRP rules are supported. To avoid confusion, the GW enforces the deletion of these ports from configuration.

------------------------------
Anat Zadik (csp)
Engineering Manager
Tel Aviv CA

Original Message:
Sent: 03-19-2021 05:16
From: Oliver Naabay
Subject: In ABR Mode, why do the ports needs to be removed?

Hi,

In ABR Mode of v14.3, why does it need to remove HTTP and HTTPS ports from the service?

I'm trying to find a reason for that in the documents but no explanation. What if we need to use a custom ports like 8080 or 8443?
#On-PremisesWAF(formerlySecuresphere)

------------------------------
Oliver Naabay
Engineer
makati
------------------------------

@Anat Zadik

Ahh.. for clarification. We don't need to add the ports under the Definition Tab?
​

------------------------------
Oliver Naabay
Engineer
makati
------------------------------

Original Message:
Sent: 03-22-2021 04:27
From: Anat Zadik (csp)
Subject: In ABR Mode, why do the ports needs to be removed?

Yes, you will need to add a TRP rule for these ports.

------------------------------
Anat Zadik (csp)
Engineering Manager
Tel Aviv CA

Original Message:
Sent: 03-22-2021 04:12
From: Oliver Naabay
Subject: In ABR Mode, why do the ports needs to be removed?

@Anat Zadik

Thank you very much for the response.

We enabled the TRP and for now it is working fine. But what if we need to use a custom ports like 8080 or 8443? Example, to access oliver.com I will use oliver.com:8080. Do we need to add these ports?

------------------------------
Oliver Naabay
Engineer
makati

Original Message:
Sent: 03-21-2021 03:58
From: Anat Zadik (csp)
Subject: In ABR Mode, why do the ports needs to be removed?

In ABR mode, protection of ports in pure bridge mode is currently not supported. only TRP rules are supported. To avoid confusion, the GW enforces the deletion of these ports from configuration.

------------------------------
Anat Zadik (csp)
Engineering Manager
Tel Aviv CA

Original Message:
Sent: 03-19-2021 05:16
From: Oliver Naabay
Subject: In ABR Mode, why do the ports needs to be removed?

Hi,

In ABR Mode of v14.3, why does it need to remove HTTP and HTTPS ports from the service?

I'm trying to find a reason for that in the documents but no explanation. What if we need to use a custom ports like 8080 or 8443?
#On-PremisesWAF(formerlySecuresphere)

------------------------------
Oliver Naabay
Engineer
makati
------------------------------

That is correct. You can add the ports to the existing TRP rule.

------------------------------
Anat Zadik (csp)
Engineering Manager
Tel Aviv CA
------------------------------

Original Message:
Sent: 03-22-2021 04:40
From: Oliver Naabay
Subject: In ABR Mode, why do the ports needs to be removed?

@Anat Zadik

Ahh.. for clarification. We don't need to add the ports under the Definition Tab?

But we must specify the custom ports under Reverse Proxy Tab?

Is my understanding correct?

​

------------------------------
Oliver Naabay
Engineer
makati

Original Message:
Sent: 03-22-2021 04:27
From: Anat Zadik (csp)
Subject: In ABR Mode, why do the ports needs to be removed?

Yes, you will need to add a TRP rule for these ports.

------------------------------
Anat Zadik (csp)
Engineering Manager
Tel Aviv CA

Original Message:
Sent: 03-22-2021 04:12
From: Oliver Naabay
Subject: In ABR Mode, why do the ports needs to be removed?

@Anat Zadik

Thank you very much for the response.

We enabled the TRP and for now it is working fine. But what if we need to use a custom ports like 8080 or 8443? Example, to access oliver.com I will use oliver.com:8080. Do we need to add these ports?

------------------------------
Oliver Naabay
Engineer
makati

Original Message:
Sent: 03-21-2021 03:58
From: Anat Zadik (csp)
Subject: In ABR Mode, why do the ports needs to be removed?

In ABR mode, protection of ports in pure bridge mode is currently not supported. only TRP rules are supported. To avoid confusion, the GW enforces the deletion of these ports from configuration.

------------------------------
Anat Zadik (csp)
Engineering Manager
Tel Aviv CA

Original Message:
Sent: 03-19-2021 05:16
From: Oliver Naabay
Subject: In ABR Mode, why do the ports needs to be removed?

Hi,

In ABR Mode of v14.3, why does it need to remove HTTP and HTTPS ports from the service?

I'm trying to find a reason for that in the documents but no explanation. What if we need to use a custom ports like 8080 or 8443?
#On-PremisesWAF(formerlySecuresphere)

------------------------------
Oliver Naabay
Engineer
makati
------------------------------

@Anat Zadik

Thank you very much for your assistance. :-D​

------------------------------
Oliver Naabay
Engineer
makati
------------------------------

Original Message:
Sent: 03-22-2021 04:45
From: Anat Zadik (csp)
Subject: In ABR Mode, why do the ports needs to be removed?

That is correct. You can add the ports to the existing TRP rule.

------------------------------
Anat Zadik (csp)
Engineering Manager
Tel Aviv CA

Original Message:
Sent: 03-22-2021 04:40
From: Oliver Naabay
Subject: In ABR Mode, why do the ports needs to be removed?

@Anat Zadik

Ahh.. for clarification. We don't need to add the ports under the Definition Tab?

But we must specify the custom ports under Reverse Proxy Tab?

Is my understanding correct?

​

------------------------------
Oliver Naabay
Engineer
makati

Original Message:
Sent: 03-22-2021 04:27
From: Anat Zadik (csp)
Subject: In ABR Mode, why do the ports needs to be removed?

Yes, you will need to add a TRP rule for these ports.

------------------------------
Anat Zadik (csp)
Engineering Manager
Tel Aviv CA

Original Message:
Sent: 03-22-2021 04:12
From: Oliver Naabay
Subject: In ABR Mode, why do the ports needs to be removed?

@Anat Zadik

Thank you very much for the response.

We enabled the TRP and for now it is working fine. But what if we need to use a custom ports like 8080 or 8443? Example, to access oliver.com I will use oliver.com:8080. Do we need to add these ports?

------------------------------
Oliver Naabay
Engineer
makati

Original Message:
Sent: 03-21-2021 03:58
From: Anat Zadik (csp)
Subject: In ABR Mode, why do the ports needs to be removed?

In ABR mode, protection of ports in pure bridge mode is currently not supported. only TRP rules are supported. To avoid confusion, the GW enforces the deletion of these ports from configuration.

------------------------------
Anat Zadik (csp)
Engineering Manager
Tel Aviv CA

Original Message:
Sent: 03-19-2021 05:16
From: Oliver Naabay
Subject: In ABR Mode, why do the ports needs to be removed?

Hi,

In ABR Mode of v14.3, why does it need to remove HTTP and HTTPS ports from the service?

I'm trying to find a reason for that in the documents but no explanation. What if we need to use a custom ports like 8080 or 8443?
#On-PremisesWAF(formerlySecuresphere)

------------------------------
Oliver Naabay
Engineer
makati
------------------------------