Hi Clyde,
1) Make sure the "Encrypt" checkbox is checked
2) Is HTTP working when going through the gateway?
3) If so it's probably an SSL issue. If you're in version 13 and above -
Under setup-> sites->YOUR SERVICE->Reverse proxy-> CLIENT SSL Negotiation settings, . choose "High Performance RP client side SSL settings",
Under SERVER SSL Negotiation settings, . choose "High Performance RP server side SSL settings".
4)
If HTTP does go through and the above settings do not work, you should record a tcpdump on the gw of a non-working connection, and compare that to a recording of working connection when bypassing the gw. You'll probably find either a cipher suite incompatibility or a TCP issue.
------------------------------
Roee Sharon
RSECURE
------------------------------
Original Message:
Sent: 08-16-2020 23:07
From: Clydie Oliamot
Subject: Kernel Reserve Proxy HTTPS Issue
Hi everyone,
We have deploy our imperva in a KRP mode, we have successfully browse http but we cannot browse https.
We did the ff.
1. Uploaded SSL certificate of webserver in imperva, we also define it under the Definitions
2. We tried CURL, we ping and telnet the the FQDN in CLI , it responded without any problem.
3. We also created Web Page Error.
Did we miss anything in configuration of KRP rules?
I hope you guys can help us, we have been struggling for weeks already and i couldn't find anything.
Thank you
#On-PremisesWAF(formerlySecuresphere)
------------------------------
Clydie
Mlhuillier
------------------------------