Hi Dinh Ngo Van,
Could you please let me know if you are able to configure SNMP traps from MX, GW, DRA to Solarwinds for monitoring CPU, status up/down, Throughput of each interface, filesystem space, etc.
Kindly help to share steps for it.
Thanks in advance for your help.
------------------------------
Rakesh Chinta
Senior Cyber Security Consultant
Ensign InfoSecurity (Systems) Pte Ltd.
Singapore
------------------------------
Original Message:
Sent: 04-12-2022 20:20
From: Shantanu Chaurasia
Subject: How to configure SNMP
This document talks about sending SNMP traps (snmp messages from device to snmp server/ monitoring tool) using followed actions.
https://docs.imperva.com/howto/03179152
------------------------------
SC
Original Message:
Sent: 04-12-2022 00:36
From: Ngo Dinh
Subject: How to configure SNMP
Dear all,
I can find a few guide about configuration SNMP as bellow
Imperva Documentation Portal
Imperva Documentation Portal
but i don't know how to configure send SNMP message to SNMP server (because i cannot see any step about add a snmp server on this guides). at the moment, i need send some important information such as CPU, status up/down, Throughput of each interface... on the gateway to snmp server (solarwinds).
Can someone help me? Thank you so much !
#On-PremisesWAF(formerlySecuresphere)
------------------------------
Ngo Dinh
Security Engineer
Hanoi
------------------------------