Imperva Cyber Community

communities_1.jpg
 View Only
  • 1.  Upgrade to 13.6.0.40

    Posted 10-04-2020 22:54
    Hi all,

    Currently, Im using Secure Sphere version 13.5.0.20. And I have 2 gateway (1 active, 1 backup).
    I want install patch 13.6.0.40, and my plans are:
    1. Snapshot all (2 gateway, 1 MX)
    2. Install patch 13.6.0.40 for gateway (active) first, and monitor 1 week. If system have no problem, I will install patch to another gateway and MX.
    But I confuse,Is it okay if I do that?

    Thanks you,
    #All Imperva

    ------------------------------
    dat thanh
    ------------------------------


  • 2.  RE: Upgrade to 13.6.0.40

    Posted 10-05-2020 11:47
    Edited by Christopher Detzel 10-08-2020 07:46
    @dat lyoko1412

    Thanks for the question. I just confirmed that that plans should be ok.  There could be a fix for this, but to get it, you will need to contact our support team. Please refer to this link to get help from support. I hope that helps!

    ------------------------------
    Christopher Detzel
    Community Manager
    Imperva
    ------------------------------



  • 3.  RE: Upgrade to 13.6.0.40

    Posted 10-07-2020 09:30
    I tried patching from 13.5.0.20_0 to 13.6.0.40 as i mentioned here.
    GW was working well in previous version after upgrade it began restarting itself.
    We couldn't figure out the reason and rolled it back to 13.5.0.20. 
    i haven't heard about 13.6.0.40_5 before i hope you won't have any problems!



    ------------------------------
    murat alagoz
    TAF
    ------------------------------