Imperva Cyber Community

communities_1.jpg
 View Only

  • 1.  Redundant Architecture (STP) - Bridge IMPVHA

    Posted 10-19-2020 20:21
    Dear Team,

    Following the below documents, If the network have STP, I need to use Bridge IMPVHA with IMPVHA off.
    https://docs.imperva.com/bundle/v13.6-administration-guide/page/8568.htm
    But How can I setup Bridge IMPVHA with IMPVHA off? I cannot see the options for IMPVHA off.

    Thank you
    #On-PremisesWAF(formerlySecuresphere)

    ------------------------------
    Duc Dinh Minh
    MTech
    VIC
    ------------------------------


  • 2.  RE: Redundant Architecture (STP) - Bridge IMPVHA
    Best Answer

    Posted 10-20-2020 10:33
    Hi Duc,


    HA can be toggled off via the impcfg menu.

    From the CLI on the gateway, type impcfg to access a text UI for modifying various configurations on the gateway.

    For a full impcfg functionality map, please see: https://docs.imperva.com/bundle/v13.6-administration-guide/page/8738.htm

    The option for which you are seeking is within impcfg under: Manage SecureSphere Gateway > Manage interfaces and routes (for a bridge IMPVHA) > Toggle High Availability on a Bridge (Enabling HA will enable STP as well)

    Also, please see: https://docs.imperva.com/bundle/v13.6-administration-guide/page/58962.htm


    Thanks.


    ------------------------------
    Jaired Anderson
    Principal Consultant
    Imperva
    Tulsa OK
    ------------------------------

    Original Message