Imperva Cyber Community

Hi All, 

How can I replace the MX SSL Server Certifcate what's presented to the browser when using the GUI?

Company policy is that we must use our own PKI, and no self-signed certs allowed.

Tried to do this by Setup/Settings/SOM to MX Comm Settings / Replace Certificate ( it seemed to me that this certificate is the one that the MX GUIs web server presents to the user), but no luck.

Clicking on Replace Certificate / Upload Existing Certificate says the file was successfully uploaded (write over existing cert checkbox is checked), but nothing happens.

The MX Cert stays the original self-signed cert. However generating a new one, when I define the validity works.

Please advise

Regards 

#On-PremisesWAF(formerlySecuresphere)

------------------------------
Attila Pozsonyi
Hungarian State Treasury
Budapest
------------------------------

Hello,

Have you tried this procedure:
https://www.imperva.com/sign_in.asp?retURL=/articles/Procedure/Certificates--How-to-install-SSL-certificate-on-MX-GUI

BR,

------------------------------
Sabajete Elezaj
SNT Albania
------------------------------

Original Message:
Sent: 02-03-2021 07:12
From: Attila Pozsonyi
Subject: Replace MX Certificate

Hi All, 

How can I replace the MX SSL Server Certifcate what's presented to the browser when using the GUI?

Company policy is that we must use our own PKI, and no self-signed certs allowed.

Tried to do this by Setup/Settings/SOM to MX Comm Settings / Replace Certificate ( it seemed to me that this certificate is the one that the MX GUIs web server presents to the user), but no luck.

Clicking on Replace Certificate / Upload Existing Certificate says the file was successfully uploaded (write over existing cert checkbox is checked), but nothing happens.

The MX Cert stays the original self-signed cert. However generating a new one, when I define the validity works.

Please advise

Regards 

#On-PremisesWAF(formerlySecuresphere)

------------------------------
Attila Pozsonyi
Hungarian State Treasury
Budapest
------------------------------

Hello,

Thank you, worked like a charm!

Regards

Attila

------------------------------
Attila Pozsonyi
Hungarian State Treasury
Budapest
------------------------------

Original Message:
Sent: 02-03-2021 11:32
From: Sabajete Elezaj
Subject: Replace MX Certificate

Hello,

Have you tried this procedure:
https://www.imperva.com/sign_in.asp?retURL=/articles/Procedure/Certificates--How-to-install-SSL-certificate-on-MX-GUI

BR,

------------------------------
Sabajete Elezaj
SNT Albania

Original Message:
Sent: 02-03-2021 07:12
From: Attila Pozsonyi
Subject: Replace MX Certificate

Hi All, 

How can I replace the MX SSL Server Certifcate what's presented to the browser when using the GUI?

Company policy is that we must use our own PKI, and no self-signed certs allowed.

Tried to do this by Setup/Settings/SOM to MX Comm Settings / Replace Certificate ( it seemed to me that this certificate is the one that the MX GUIs web server presents to the user), but no luck.

Clicking on Replace Certificate / Upload Existing Certificate says the file was successfully uploaded (write over existing cert checkbox is checked), but nothing happens.

The MX Cert stays the original self-signed cert. However generating a new one, when I define the validity works.

Please advise

Regards 

#On-PremisesWAF(formerlySecuresphere)

------------------------------
Attila Pozsonyi
Hungarian State Treasury
Budapest
------------------------------

That link has moved, would you happen to know where the new link is? I'm still looking but no luck.  Thanks!

------------------------------
Michele Beverly
CyberSecurity Engineer
Lincoln NE
------------------------------

Original Message:
Sent: 02-03-2021 11:32
From: Sabajete Elezaj
Subject: Replace MX Certificate

Hello,

Have you tried this procedure:
https://www.imperva.com/sign_in.asp?retURL=/articles/Procedure/Certificates--How-to-install-SSL-certificate-on-MX-GUI

BR,

------------------------------
Sabajete Elezaj
SNT Albania

Original Message:
Sent: 02-03-2021 07:12
From: Attila Pozsonyi
Subject: Replace MX Certificate

Hi All, 

How can I replace the MX SSL Server Certifcate what's presented to the browser when using the GUI?

Company policy is that we must use our own PKI, and no self-signed certs allowed.

Tried to do this by Setup/Settings/SOM to MX Comm Settings / Replace Certificate ( it seemed to me that this certificate is the one that the MX GUIs web server presents to the user), but no luck.

Clicking on Replace Certificate / Upload Existing Certificate says the file was successfully uploaded (write over existing cert checkbox is checked), but nothing happens.

The MX Cert stays the original self-signed cert. However generating a new one, when I define the validity works.

Please advise

Regards 

#On-PremisesWAF(formerlySecuresphere)

------------------------------
Attila Pozsonyi
Hungarian State Treasury
Budapest
------------------------------

Hello,

Here is the new link:
https://docs.imperva.com/howto/989c86be

------------------------------
Sabajete Elezaj
Security Engineer
Snt Albania
Tirana
------------------------------

Original Message:
Sent: 03-25-2021 11:29
From: Michele Beverly
Subject: Replace MX Certificate

That link has moved, would you happen to know where the new link is? I'm still looking but no luck.  Thanks!

------------------------------
Michele Beverly
CyberSecurity Engineer
Lincoln NE

Original Message:
Sent: 02-03-2021 11:32
From: Sabajete Elezaj
Subject: Replace MX Certificate

Hello,

Have you tried this procedure:
https://www.imperva.com/sign_in.asp?retURL=/articles/Procedure/Certificates--How-to-install-SSL-certificate-on-MX-GUI

BR,

------------------------------
Sabajete Elezaj
SNT Albania

Original Message:
Sent: 02-03-2021 07:12
From: Attila Pozsonyi
Subject: Replace MX Certificate

Hi All, 

How can I replace the MX SSL Server Certifcate what's presented to the browser when using the GUI?

Company policy is that we must use our own PKI, and no self-signed certs allowed.

Tried to do this by Setup/Settings/SOM to MX Comm Settings / Replace Certificate ( it seemed to me that this certificate is the one that the MX GUIs web server presents to the user), but no luck.

Clicking on Replace Certificate / Upload Existing Certificate says the file was successfully uploaded (write over existing cert checkbox is checked), but nothing happens.

The MX Cert stays the original self-signed cert. However generating a new one, when I define the validity works.

Please advise

Regards 

#On-PremisesWAF(formerlySecuresphere)

------------------------------
Attila Pozsonyi
Hungarian State Treasury
Budapest
------------------------------

Great, thanks much!

------------------------------
Michele Beverly
CyberSecurity Engineer
Lincoln NE
------------------------------

Original Message:
Sent: 03-26-2021 06:36
From: Sabajete Elezaj
Subject: Replace MX Certificate

Hello,

Here is the new link:
https://docs.imperva.com/howto/989c86be

------------------------------
Sabajete Elezaj
Security Engineer
Snt Albania
Tirana

Original Message:
Sent: 03-25-2021 11:29
From: Michele Beverly
Subject: Replace MX Certificate

That link has moved, would you happen to know where the new link is? I'm still looking but no luck.  Thanks!

------------------------------
Michele Beverly
CyberSecurity Engineer
Lincoln NE

Original Message:
Sent: 02-03-2021 11:32
From: Sabajete Elezaj
Subject: Replace MX Certificate

Hello,

Have you tried this procedure:
https://www.imperva.com/sign_in.asp?retURL=/articles/Procedure/Certificates--How-to-install-SSL-certificate-on-MX-GUI

BR,

------------------------------
Sabajete Elezaj
SNT Albania

Original Message:
Sent: 02-03-2021 07:12
From: Attila Pozsonyi
Subject: Replace MX Certificate

Hi All, 

How can I replace the MX SSL Server Certifcate what's presented to the browser when using the GUI?

Company policy is that we must use our own PKI, and no self-signed certs allowed.

Tried to do this by Setup/Settings/SOM to MX Comm Settings / Replace Certificate ( it seemed to me that this certificate is the one that the MX GUIs web server presents to the user), but no luck.

Clicking on Replace Certificate / Upload Existing Certificate says the file was successfully uploaded (write over existing cert checkbox is checked), but nothing happens.

The MX Cert stays the original self-signed cert. However generating a new one, when I define the validity works.

Please advise

Regards 

#On-PremisesWAF(formerlySecuresphere)

------------------------------
Attila Pozsonyi
Hungarian State Treasury
Budapest
------------------------------

That is the only way ?!
I ask if there is another way to update the MX UI certificate like SOM's way from GUI it self

------------------------------
Mohammad Alriaty
System Engineer
Cloud Distribution
Riyadh
------------------------------

Original Message:
Sent: 03-26-2021 11:10
From: Michele Beverly
Subject: Replace MX Certificate

Great, thanks much!

------------------------------
Michele Beverly
CyberSecurity Engineer
Lincoln NE

Original Message:
Sent: 03-26-2021 06:36
From: Sabajete Elezaj
Subject: Replace MX Certificate

Hello,

Here is the new link:
https://docs.imperva.com/howto/989c86be

------------------------------
Sabajete Elezaj
Security Engineer
Snt Albania
Tirana

Original Message:
Sent: 03-25-2021 11:29
From: Michele Beverly
Subject: Replace MX Certificate

That link has moved, would you happen to know where the new link is? I'm still looking but no luck.  Thanks!

------------------------------
Michele Beverly
CyberSecurity Engineer
Lincoln NE

Original Message:
Sent: 02-03-2021 11:32
From: Sabajete Elezaj
Subject: Replace MX Certificate

Hello,

Have you tried this procedure:
https://www.imperva.com/sign_in.asp?retURL=/articles/Procedure/Certificates--How-to-install-SSL-certificate-on-MX-GUI

BR,

------------------------------
Sabajete Elezaj
SNT Albania

Original Message:
Sent: 02-03-2021 07:12
From: Attila Pozsonyi
Subject: Replace MX Certificate

Hi All, 

How can I replace the MX SSL Server Certifcate what's presented to the browser when using the GUI?

Company policy is that we must use our own PKI, and no self-signed certs allowed.

Tried to do this by Setup/Settings/SOM to MX Comm Settings / Replace Certificate ( it seemed to me that this certificate is the one that the MX GUIs web server presents to the user), but no luck.

Clicking on Replace Certificate / Upload Existing Certificate says the file was successfully uploaded (write over existing cert checkbox is checked), but nothing happens.

The MX Cert stays the original self-signed cert. However generating a new one, when I define the validity works.

Please advise

Regards 

#On-PremisesWAF(formerlySecuresphere)

------------------------------
Attila Pozsonyi
Hungarian State Treasury
Budapest
------------------------------

Hi,

A own an imperva MX and 2 GW but im not able to change te cert .. i dont have that commands explained in your link. 

MX version: 13.6.0.80_0

Please send me a link how to chance gui cert because i am not able to make any changes because of ssl expire.

------------------------------
Ferenczy Csaba
Netwok Engineer
State Treasury Hungary
------------------------------

Original Message:
Sent: 03-26-2021 06:36
From: Sabajete Elezaj
Subject: Replace MX Certificate

Hello,

Here is the new link:
https://docs.imperva.com/howto/989c86be

------------------------------
Sabajete Elezaj
Security Engineer
Snt Albania
Tirana

Original Message:
Sent: 03-25-2021 11:29
From: Michele Beverly
Subject: Replace MX Certificate

That link has moved, would you happen to know where the new link is? I'm still looking but no luck.  Thanks!

------------------------------
Michele Beverly
CyberSecurity Engineer
Lincoln NE

Original Message:
Sent: 02-03-2021 11:32
From: Sabajete Elezaj
Subject: Replace MX Certificate

Hello,

Have you tried this procedure:
https://www.imperva.com/sign_in.asp?retURL=/articles/Procedure/Certificates--How-to-install-SSL-certificate-on-MX-GUI

BR,

------------------------------
Sabajete Elezaj
SNT Albania

Original Message:
Sent: 02-03-2021 07:12
From: Attila Pozsonyi
Subject: Replace MX Certificate

Hi All, 

How can I replace the MX SSL Server Certifcate what's presented to the browser when using the GUI?

Company policy is that we must use our own PKI, and no self-signed certs allowed.

Tried to do this by Setup/Settings/SOM to MX Comm Settings / Replace Certificate ( it seemed to me that this certificate is the one that the MX GUIs web server presents to the user), but no luck.

Clicking on Replace Certificate / Upload Existing Certificate says the file was successfully uploaded (write over existing cert checkbox is checked), but nothing happens.

The MX Cert stays the original self-signed cert. However generating a new one, when I define the validity works.

Please advise

Regards 

#On-PremisesWAF(formerlySecuresphere)

------------------------------
Attila Pozsonyi
Hungarian State Treasury
Budapest
------------------------------