Imperva Cyber Community

 View Only

  • 1.  How to configure SNMP

    Posted 04-12-2022 02:47
    Dear all, 
    I can find a few guide about configuration SNMP as bellow
    Imperva Documentation Portal
    Imperva remove preview
    Imperva Documentation Portal
    View this on Imperva >

    Imperva Documentation Portal

    but i don't know how to configure send SNMP message to SNMP server (because i cannot see any step about add a snmp server on this guides). at the moment, i need send some important information such as CPU, status up/down, Throughput of each interface... on the gateway to snmp server (solarwinds).

    Can someone help me? Thank you so much !

    #On-PremisesWAF(formerlySecuresphere)

    ------------------------------
    Ngo Dinh
    Security Engineer
    Hanoi
    ------------------------------


  • 2.  RE: How to configure SNMP

    Posted 04-12-2022 03:15
    Hi,

    SNMP is basically pulling method, when server need some information, request to client.
    So you need to find how to pull information in server.

    THX!

    ------------------------------
    Byunguk Jung
    SE
    DongHoonITech
    Seoul
    ------------------------------

    Original Message


  • 3.  RE: How to configure SNMP

    Posted 04-12-2022 20:21
    This document talks about sending SNMP traps (snmp messages from device to snmp server/ monitoring tool) using followed actions.
    https://docs.imperva.com/howto/03179152

    ------------------------------
    SC
    ------------------------------

    Original Message