Imperva Cyber Community

Hello all,

I have received an update that DAM cluster now need at least 3 nodes (manager, member and redundant) and no more active-passive. But I can't find in the documentation.

Anyone can tell me where to check that info?

Thanks so much everyone!

Dear Long,

You can still use the gateways as Active/Passive until you configure the cluster. The requirement which you are mentioning is for clustering.

More details can be found at the cluster concepts.



https://docs.imperva.com/bundle/v14.9-database-activity-monitoring-user-guide/page/6516.htm

https://docs.imperva.com/bundle/v14.9-database-activity-monitoring-user-guide/page/6518.htm

Hope this helps, For migrating normal gateways to cluster we can use below guide,

https://docs.imperva.com/bundle/v14.9-database-activity-monitoring-user-guide/page/8112.htm

Hello all,

I have received an update that DAM cluster now need at least 3 nodes (manager, member and redundant) and no more active-passive. But I can't find in the documentation.

Anyone can tell me where to check that info?

Thanks so much everyone!

Dear Nikhil,

Could you please help to provide Active/passive configuration?

Thanks,

Dear Long,

You can still use the gateways as Active/Passive until you configure the cluster. The requirement which you are mentioning is for clustering.

More details can be found at the cluster concepts.



https://docs.imperva.com/bundle/v14.9-database-activity-monitoring-user-guide/page/6516.htm

https://docs.imperva.com/bundle/v14.9-database-activity-monitoring-user-guide/page/6518.htm

Hope this helps, For migrating normal gateways to cluster we can use below guide,

https://docs.imperva.com/bundle/v14.9-database-activity-monitoring-user-guide/page/8112.htm

Hello all,

I have received an update that DAM cluster now need at least 3 nodes (manager, member and redundant) and no more active-passive. But I can't find in the documentation.

Anyone can tell me where to check that info?

Thanks so much everyone!

Hey Long,

Just a quick details about on gateway configuration (Without cluster):

Gateway Group Setup:

• Adding gateways to a group results in Active/Active mode.
• Agents can be configured with both gateways or available gateways.
• You manually pick primary and secondary gateways for load balancing in agent configuration.

For more info on agent failover, check out this article: Agent Failover Process.

Thanks for the revert,

Dear Nikhil,

Could you please help to provide Active/passive configuration?

Thanks,

Dear Long,

You can still use the gateways as Active/Passive until you configure the cluster. The requirement which you are mentioning is for clustering.

More details can be found at the cluster concepts.



https://docs.imperva.com/bundle/v14.9-database-activity-monitoring-user-guide/page/6516.htm

https://docs.imperva.com/bundle/v14.9-database-activity-monitoring-user-guide/page/6518.htm

Hope this helps, For migrating normal gateways to cluster we can use below guide,

https://docs.imperva.com/bundle/v14.9-database-activity-monitoring-user-guide/page/8112.htm

Hello all,

I have received an update that DAM cluster now need at least 3 nodes (manager, member and redundant) and no more active-passive. But I can't find in the documentation.

Anyone can tell me where to check that info?

Thanks so much everyone!

Hello all,

I have received an update that DAM cluster now need at least 3 nodes (manager, member and redundant) and no more active-passive. But I can't find in the documentation.

Anyone can tell me where to check that info?

Thanks so much everyone!

#DatabaseActivityMonitoring

------------------------------
Long Doan
Senior Product Consultant
M.Tech Products Pte Ltd
Singapore
------------------------------

Hi,

I read on document then we still configure active cluster, backup/ passive cluster:

Understanding Standard Cluster Architecture

Key:

1. Gateways
2. Active Cluster Manager
3. Backup Cluster Manager
4. Redundant (N+1) Gateway
5. Management Server
6. Data Sync
7. Agents

Understanding Standard Cluster Architecture (imperva.com) 

https://docs.imperva.com/bundle/v14.9-database-activity-monitoring-user-guide/page/6527.htm

------------------------------
Thomas Dao

Original Message:
Sent: 08-17-2023 23:53
From: Long Doan
Subject: HA DAM Gateways

Hello all,

I have received an update that DAM cluster now need at least 3 nodes (manager, member and redundant) and no more active-passive. But I can't find in the documentation.

Anyone can tell me where to check that info?

Thanks so much everyone!

#DatabaseActivityMonitoring

------------------------------
Long Doan
Senior Product Consultant
M.Tech Products Pte Ltd
Singapore
------------------------------