Imperva Cyber Community

 View Only
  • 1.  How to check gateway operation mode

    Posted 10-20-2022 01:30
    Hi Community,

    Hope you guys are doing well.

    Could you please tell me how to check whether the gateway is running in sniffing mode or in Bridge mode.
    I have tried running command "impctl gateway show" as stated in https://support.imperva.com/s/article-items?articleId=e21f3097
    But i did not found the desired output.

    Is there any other method through which i can check?


    Thanks!
    #DatabaseActivityMonitoring

    ------------------------------
    Ganesh Thube
    Technical Consultant
    Meta Infotech Pvt. Ltd.
    Mumbai
    ------------------------------


  • 2.  RE: How to check gateway operation mode

    Posted 10-20-2022 03:39

    Hello Ganesh,

    As per my knowledge there are two ways how you can look for gateway mode:

    - CLI
    - Management Interface

    ------------------------------------------------------------------------------------

    CASE 1 - CLI

    As I know via CLI are two methods:

    Method 1:  impctl gateway show

    The output in my lab as below:



    Another way how you can check the gateway via cli is by following the steps below on the Method 2:

    >> impcfg
    >> Manage SecureSphere Gateway

    In this case the WAF One Box is in Bridge IMPHVA Mode:

    Output:


    If you want to change the mode of the Gateway:


    >> Manage SecureSphere Gateway
    >> Change Operation Mode 

    Output:




    CASE 2 - Management Interface

    You can find on the following path:

    Main > Setup > Gateway



    I hope it will help and is the desired output.

    Kind Regards,



    ------------------------------
    Olgerta Prendi
    Cyber Security Specialist
    S&T AG
    Tirana
    ------------------------------